In order to gain further insight into the properties of the quant

In order to gain further insight into the properties of the quantum ring solar Selleckchem GANT61 cells, the PL spectra of the quantum ring solar cell sample before and after rapid thermal annealing are measured and shown in Figure 3. At a laser excitation power I L = 0.3 W/cm2, the PL peak at 1.64 eV appears only after post-thermal annealing and the PL spectrum intensity increases distinctly as a function of annealing temperature. This peak can be attributed to the ground energy level transition in the quantum ring, which corresponds to the photoresponse peak at 1.52 eV measured at 300 K. The PL spectra have shown a blueshift and significant broadening after thermal annealing. The integrated intensity, peak energy, and full width

at half maximum of the PL spectra measured to laser excitation I L as a function of the annealing temperature are plotted in Figure 3c. At high laser

www.selleckchem.com/products/dibutyryl-camp-bucladesine.html excitation I H = 3,000 W/cm2, a second PL peak appears at approximately 1.7 eV after annealing, as shown in Figure 3b. The second peak is assigned to the excited state transitions in the GaAs quantum ring structures which correspond to the photoresponse peak at 1.63 eV. Similar to the quantum ring ground state transition, the PL spectra experience an emission enhancement as well as a blueshift with increasing annealing temperature (Figure 3d). Figure 3 PL spectra of solar cells and PL peak energy and integrated PL intensity. (a) PL spectra of the solar cell samples annealed with different temperatures. The laser Casein kinase 1 excitation power is I L = 0.3 W/cm2. (b) PL spectra of the solar cells annealed with different temperatures. The laser excitation power is I H = 3,000 W/cm2. (c) PL peak energy and integrated PL intensity as a function of

annealing temperatures under low excitation power I L. The inset is the PL line width as a function of annealing temperatures. (d) PL peak energy and integrated PL intensity as a function of annealing temperatures under high excitation power I H. The data obtained from the as-grown material is plotted at 650°C. The increase in the PL yield after thermal annealing is due to the considerable improvement of material quality. Post-thermal annealing promotes the depletion of defects generated in GaAs nanostructures as well as the AlGaAs barriers processed at low temperatures. The blueshift and the broadening of the PL spectra after annealing is due to the interdiffusion of Al and Ga at the GaAs quantum ring and Al0.33Ga0.67As barrier interface. With increasing annealing temperature, the Al and Ga elements become mobilized with diffusion length as a function of annealing temperature. As a result, the concentration of Al element is increased in the GaAs quantum ring. The PL line width (PL peak 1.64 eV) changes from 29 to 43 meV as the annealing temperature increases from 700°C to 850°C (the inset in Figure 3c). The PL spectrum broadening is somehow different from the observation for InAs quantum dots.

Comments are closed.